Architectural · A-GP9VA

Start Sheet

Units: imperial
Sheet: A0.3
Discipline: Architectural

Materials

Cold-formed Steel Concrete Masonry / CMU Metal (misc.)

In this detail

EQUIPMENT, PANEL BOARD, CABINET, OR SIMILAR FEATURE CRASH RAIL (ALL TYPES), UON TYPE NO 1 (SHOWN), TYPE NO 2, OR TYPE NO 4 CORNER OR EDGE GUARD WHERE BUMPER/CRASH RAILS TERMINATE OR DO NOT TURN CORNER (TYP AT REGIONAL LABS) BUMPER RAIL (ALL TYPES), UON DOOR FRAME OR CASED OPENING FRAME OUTLET OR SIMILAR OUTLET OR SIMILAR WHEN ADJ TO FRAME WHERE BUMPER/CRASH RAILS TURN CORNER (TYP AT SPECIAL TESTING) TYPE NO 2 (SHOWN), TYPE NO 1, OR TYPE NO 4 CORNER OR EDGE GUARD 2' - 10" UON 1' - 4" UON 6" 3' - 6" - TYPE 1 2" TYP 2" TYP 2" TYP 4" TYP 4" TYP 2" TYP 6" 6' - 8" - TYPE NOS 2 AND 4 2" TYP 8" 4" TYP B. C. 3. A. 1. 2. EXCEPT WHERE DIRECTED TO PLACE ITEMS OF THE WORK AT THE "APPROXIMATE LOCATION SHOWN," DO NOT SCALE DRAWINGS FOR DIMENSIONAL INFORMATION. ALL ELEMENTS OF THE DRAWINGS MAY NOT BE DRAWN TO EXACT SCALE. ALL DIMENSIONS REQUIRED ARE SHOWN (OR MAY BE DERIVED FROM THOSE SHOWN OR NOTED) ON THE FLOOR PLANS, DETAIL PLANS, ELEVATIONS, SECTIONS, SCHEDULES, CONFIGURATION DETAILS, AND SPECIFICATIONS. SEE THE NOTES BELOW AND SYMBOLS ON SHEET A0.1 FOR DIMENSIONING CONVENTIONS USED ON THIS PROJECT. EXCEPT WHERE SPECIFICALLY NOTED TO THE CONTRARY, ALL DIMENSIONS SHOWN ON THE ARCHITECTURAL DRAWINGS CONFORM TO THE FOLLOWING CONVENTIONS: DIMENSIONS UTILIZING THE "CENTERLINE" SYMBOL ARE MEASURED TO: STRUCTURAL OR DIMENSIONAL GRID LINES. CENTERLINE OF CONCRETE OR CONC MASONRY UNIT WALLS (EXCLUSIVE OF FURRING OR APPLIED FINISHES HAVING THICKNESS). REFER TO THE ARCH PLANS AND SECTIONS, THE STRUCT DRAWINGS, OR PARTITION SCHEDULE TO DETERMINE THE THICKNESS OF CONCRETE OR CONC MASONRY UNIT WALLS. CENTERLINE OF PARTITION ASSEMBLY (EXCLUSIVE OF ANY APPLIED FINISHES HAVING THICKNESS WHICH MAY BE REFER TO SHEET A0.1 FOR SYMBOL USED TO INDICATE CENTERLINE DIMENSION. DIMENSIONS UTILIZING THE "FACE OF" SYMBOL ARE MEASURED TO: FACE OF CONCRETE OR CONC MASONRY UNIT WALL (EXCLUSIVE OF APPLIED FINISHES HAVING THICKNESS OR FURRING WHICH MAY BE ADDED TO THE FACE OF SUCH WALLS). FACE OF PARTITION ASSEMBLY (EXCLUSIVE OF ANY APPLIED FINISHES HAVING THICKNESS WHICH MAY BE ADDED TO SUCH WALL) AS DEFINED BY THE PARTITION SCHEDULE. UNLESS NOTED AS A "FACE OF FINISH" OR "CLEAR" DIMENSION (SEE NOTE 'E' BELOW), DIMENSIONS ARE NOT MEASURED TO THE FACE OF APPLIED FINISH. REFER TO THE "PARTITION SCHEDULE" TO DETERMINE THE THICKNESS OF EACH PARTITION TYPE. INSIDE EDGE OF FINISHED DOOR OPENING. REFER TO THE "DOOR SCHEDULE" FOR ADDITIONAL DIMENSIONAL INFORMATION. DIMENSION OR WORK POINT AS INDICATED ON RELATED ARCH DETAIL PLAN, SECTION, ELEVATION, LAYOUT OR CONFIGURATION DETAIL, OR CONSTRUCTION DETAIL. 3. NOTE NO 3 CONTINUED: START Sheet

Members view this detail in full resolution, download the CAD files (SVG, PDF), and open any detail in the built-in CAD editor to edit and export DXF or DWG.

Find similar details